|
|||||||||||||||||||||||||
The Pentek PO1HE2 Polypropylene High Efficiency Filter Bags (5 Bags/Case) are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis, microorganisms, and oxidizing agents. They can withstand temperatures up to 200°F. The PO1HE2 filter bag is made of FDA-compliant materials. The PO1HE2 high efficiency filter bags have a composite construction of microfiber, felt, and spun-bonded materials to hold 3 to 4 times more dirt than standard bags. The bag filters are rated to nominal 1 micron. The Pentek PO1HE2 bag filter has a stainless steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes. There is an initial pressure drop of less than 0.8 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed. The Pentek PO1HE2 Polypropylene Felt Filter Bags are a Size #2 which means they are 7 inches in diameter and 32 inches in length. The bag filter area is 4.4 square feet. The Maximum Temperature of the device is 200°F (bags only) and the Filter Media is Polypropylene. The Ring Material is Stainless Steel and the maximum flow rate is 110 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions. The Pentek PO1HE2 Filter Bag Alternate Part #'s include Pentek # P01HE2 Filter Bag; Pentek # 255127-03 Filter Bag; and formerly Ametek # 255127 Filter Bag and US Filter # 255127-75 Filter Bag. It can replace Parker XLH Series Filter Bags; 3M 100 Series Filter Bags and some 3M 500 Series Filter Bags. | |||||||||||||||||||||||||