|
|||||||||||||||||||||||||
Pentek PE25G4S Polyester Felt Filter Bags (20 Bags/Case) are rated to nominal 25 microns. They are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and microorganisms. The Pentek PE25G4S bag filter has a galvanized carbon steel ring sewn in at the top of the filter bag. The filter bag also comes with a handle for fast, easy bag filter changes. The Pentek PE25G4S Polyester Felt Filter Bag is made of FDA-compliant materials. These high flow filter bags are single layer for straining and filtering at high flow rates. It can withstand temperatures up to 300°F. There is an initial pressure drop of less than 0.5 psi for the maximum rated flow at 68 degrees Farenheit. Differential pressure of 15 psi indicates the filter bag needs to be changed. The Pentek PE25G4S Polyester Felt Filter Bags are a Size #4 which means they are 4.1 inches in diameter and 14 inches in length. The bag filter area is 1 square feet. The Maximum Temperature of the device is 300°F (bags only) and the Filter Media is Polyester Felt. Filter Finish is Glazed and the Ring Material is Galvanized Carbon Steel. Maximum Flow Rate is 40 gpm. Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions. The Pentek PE25G4S Filter Bag Alternate Part #'s include Pentek # 255096-03 Filter Bag; Grainger # 4BE61 Filter Bag; and formerly Ametek # 255096 Filter Bag and US Filter # 255096-75 Filter Bag. | |||||||||||||||||||||||||