Pentek 158204 #20 Slim Line 1/2" Blue Filter Housing w/pr

Item Number : 158204


Price: $39.99

The Pentek 158204 #20 Slim Line 1/2" Blue Filter Housing w/pr uses 20" L x 2.5" W water filters. It has 1/2" NPT inlet/outlets. It can be used in under-sink, in countertop residential filtration, in pre- and post reverse osmosis filtration, recreational vehicle filtration, and food service and humidifying systems. The slim design reduces space required for installation without sacrificing capacity. The Pentek 158204 has a leak-proof seal with a top-seated o-ring. The housing has four bosses molded into the cap for mounting purposes. The water filter cartridge is not included with the housing. This allows you to purchase the best water filter for your water supply. Sediment water filters reduce dirt, sand, silt, sediment, rust particles, and scale particles. The Pentek 158204 Slim Line filter housings are an excellent choice for low-flow applications and when space and chemical compatibility are concerns. Two #20 SlimLine housings can be connected with a pipe nipple or pipe union. There are several pipe nipples available that can be used to connect two #20 SlimLine Housings. NP-12 - Use this pipe nipple to connect two #20 SlimLine Housings with 1/2" Inlet/Outlets. The water filter cartridge life depends on the water filter cartridge purchased, the quality of your water, and the amount of water used. You will know when to change the filter cartridge when your water pressure drops. Drinking water filters produce healthier, better-tasting drinking water by reducing chlorine taste and odor and other contaminants. The Pentek 158204 housings have a black, reinforced polypropylene cap with a pressure release button. It is molded from rugged reinforced polypropylene. The most popular water filters for the #20 Blue Filter Housing are P5-20 5 Micron Sediment Filter and C1-20 5 Micron Chlorine Taste & Odor Reduction Carbon Filter. Recommended parts and accessories include replacement OR-38 O-Rings. One o-ring is included with the housing purchase, but you should replace the o-ring periodically to prevent leaks. Use silicone grease to lubricate the o-rings to prevent leaking. Also use the SW-1 housing wrench to remove the sump. The wrench should not be used to tighten the sump back onto the cap. Over tightening may cause damage to the o-ring. The Pentek 158204 #20 Slim Line 1/2" Blue Filter Housing w/pr is very easy to install. The housing is 21-7/8" x 4-3/8" (556 mm x 111 mm). You will need to allow slightly more room in addition to the housing dimensions for installation. A SL-BR mounting bracket is recommended for installation of the filter housing. When installed, protect housing against freezing to prevent cracking of the filter and water leakage.

Pentek 158204 #20 Slim Line 1/2" Blue Filter Housing w/pr

Request More Information