Mcquay International Geothermal Heat Pump 5 Ton Item Number : VFW1060 Price: $3,789.00 Available Options: Aux. In-Duct Heat Strip: None10 Kw (+$175.00)15 Kw (+$235.00)20 Kw (+$265.00) ECM Blower and Desuperheater: NoYes (+$450.00) Product Added :

Geothermal units qualify for tax rebates! Get more money back from the government! Weight (Shipping):450 Model: VFW1060 Short Desc.:60,000 btu water source heat pump Click here for performance data of the base model. Click here for performance data with ECM blower and desuperheater. We currently have the 5 ton models available for the same price with the cupro nickel coil, this coil is used with open loop applications for more details call 1-800-360-1569. There is now a 30% government tax credit for homeowners that install geothermal heat pumps with no maximum limit!!!!  Check out Learn more for all the information.   HeatPump, Geothermal What is a GeoThermal Heatpump? Because underground temperatures do not change and remain relatively constant year-round, a geothermal system, which consists of an indoor unit and a buried earth loop, capitalizes on these constant temperatures. The winter, fluid circulating through the system's earth loop absorbs stored heat and carries it indoors. The indoor unit compresses the heat to a higher temperature and distributes it throughout the building. In the summer, the system reverses, pulling heat from the building, carrying through the earth loop and depositing it in the cooler earth. Why are geothermal heat pumps more efficient than air source heat heat pumps? The geothermal system cycles water from a well, pond, lake or river, or water piped through underground plastic tubing, to warm or cool the heat pump's refrigerant. Liquid such as water or an antifreeze solution is a much better heat transfer medium than air. Overall, the liquid medium for heat transfer is about 30% more efficient than air. How many Types of Geothermal Units Exist? There are 4 types. Ground Water Energy Systems (Open Loop) have been utilizing the earth's natural heat source/heat sink ability for over 40 years. Ground Water Energy Systems draw water from an aquifer via a supply well, pass through the Geothermal heat pump's heat exchanger where heat is either absorbed or rejected, then returned to the aquifer via a return well. Vertical Energy Systems (Closed Loop) utilize the natural thermal properties of the earth in a similar manor to the Ground Water Energy Systems. However instead of pumping water out of a well then back into the ground, you simply circulate water or an antifreeze solution through a closed loop network of plastic pipe that is inserted into vertical wells. These vertical wells are drilled to a depth of 100 to 300 feet per ton of air conditioning. Horizontal Energy Systems (Closed Loop) also utilize the Earth's plentiful and renewable thermal characteristics. Like the Vertical Energy systems, Horizontal Energy Systems circulate water or an antifreeze solution through a closed loop network of sealed and pressurized plastic pipe that is buried in the ground. Instead of inserting the plastic pipe into vertical wells the pipe is laid into horizontal trenches that are trenched at a typical depth of 4 to 6 feet and to a length of 75 to 400 feet per ton of air conditioning. Pond or Lake Energy Systems (Closed Loop) may be the most economical system to install and has many advantages for producing energy savings. This system utilizes a near by body of water such as a lake or a pond. As with the Vertical and Horizontal Energy Systems it is a closed loop of sealed and pressurized plastic pipe and water or an antifreeze fluid solution. Instead of inserting the pipe into a vertical well or laying the pipe in a horizontal trench the pipe is submerged into a body of water (pond or lake) where it can utilize the consistent temperature and outstanding heat transfer characteristics of the water. We carry 1.5 Ton to 5.5 Ton, Closed Loop and Open Loop Systems. (please call 800-360-1569 for prices!!) Satisfied Geothermal Customer   JHD Wrote: It is working beautifully..! Thank You !  Thank You !  Thank You !!!!! This absolutely is the slickest,  best,  and most efficient Water Source Heat Pump I have ever had.  The incredible thing is:  I replaced a 150,000 btu gas furnace and a central A/C unit;  Previously I let the fan run all the time.  The incredible thing is our electrical bill has not gone up at all – actually slightly less and the other bonus is – no propane gas bill…!  I have bills to prove it. One happy customer (especially since my trouble / problem is solved)….!!! JHD Ed from Farmington, ME wrote: Just wanted to let you know that the filter rack worked perfectly. My geothermal system is heating my house and the temperature last night was below 0 degrees. My house is over 3000 sq ft.and compared with oil I save at least $450 even though my electric bill for the month of December was $150 over what I paid last year, and it is less than the cost of heating with wood without all the mess and work. Needless to say I am very happy with my system. At some point, I will need to add some way to heat hot water (we are still using the old oil boiler until the tank is empty)  and a small propane furnace to help the geothermal on the coldest days. I am thinking of and on demand hot water system but I would be interested in any suggestions that you might have. Thanks for sticking with me after the sale.  Ed Satisfied Geothermal Customer

Enfinity™ Model VFC/VFW Vertical Floor-mounted Water Source Heat Pumps

ProductBrochure

We are pleased to introduce the new Enfinity™ Model VFC/VFW vertical floor-mounted water source heat pump (sizes 009 thru 070).

Enfinity™ Model VFC/VFW vertical floor-mounted water source heat pumps use non-ozone depleting R-410A refrigerant, which – along with high Energy Efficiency Ratios (EER’s) – helps preserve our environment and precious energy resources.  Units offer maximum flexibility to help you achieve high efficiency, low operating costs and superior IAQ within your commercial or residential building budget.

- They can be selected for standard boiler/tower or geothermal applications
- Multiple configurations reduce design time and help you avoid obstructions and use minimum ductwork to reduce installation costs
- Multiple factory-installed features and options allow you to select the unit that closely matches your application requirements while lowering installation costs.
- Small footprint design makes it easier to meet space requirements for new construction and replacement applications

- R-410A Refrigerant – Has no ozone depletion potential or phase-out date, helping to minimize environmental impact and protect against refrigerant availability issues over the economic life of your equipment investment.
- MicroTech® III Unit Controller – Open Choices^TM control feature allows Standalone or easy integration into a LONWORKS® (LonMark 3.4 Certified) or BACnet® communications network using and add-on communication module.
- ECM fan motor – improves unit efficiency and maintains constant airflow over varying system static pressure.
- Hot Gas Reheat Coil – Required for many applications needing added humidity control, this option is selectable for sizes 019 to 070.
- Desuperheater – this heat exchanger system aids in domestic hot water production while the water source heat pump is in the cooling mode of operation.
- Auxiliary/Emergency Electric Heat Coil (5kw or 10kw – single point power) – in emergency situations where the compressor no longer functions, the integral electric heat coil can provide temporary heating until the compressor is replaced.
- 2-way motorized valves (NO or NC) – ideal for variable pumping applications – when there isn’t a call for unit operation, the valve closes, reducing the flow requirements through the condenser water loop.
- Compressor Sound Blanket – new and improved compressor sound blanket for sound sensitive applications.
- Painted Cabinet  - suitable for residential applications.

 

Request More Information

Name: Phone Number: or Email:

Item Number : VFW1060

Vertical Floor-mounted (½ to 25 tons)

 Geothermal Tax Credits

 

Enfinity™ Model VFC/VFW Vertical Floor-mounted Water Source Heat Pumps

We are pleased to introduce the new Enfinity™ Model VFC/VFW vertical floor-mounted water source heat pump (sizes 009 thru 070). Enfinity™ Model VFC/VFW vertical floor-mounted water source heat pumps use non-ozone depleting R-410A refrigerant, which – along with high Energy Efficiency Ratios (EER’s) – helps preserve our environment and precious energy resources.  Units offer maximum flexibility to help you achieve high efficiency, low operating costs and superior IAQ within your commercial or residential building budget.

ProductBrochure                                  CompleteCatalog

• They can be selected for standard boiler/tower or geothermal applications
• Multiple configurations reduce design time and help you avoid obstructions and use minimum ductwork to reduce installation costs
• Multiple factory-installed features and options allow you to select the unit that closely matches your application requirements while lowering installation costs.
• Small footprint design makes it easier to meet space requirements for new construction and replacement applications

Factory-installed Features and Options

• R-410A Refrigerant – Has no ozone depletion potential or phase-out date, helping to minimize environmental impact and protect against refrigerant availability issues over the economic life of your equipment investment.
• MicroTech® III Unit Controller – Open Choices^TM control feature allows Standalone or easy integration into a LONWORKS® (LonMark 3.4 Certified) or BACnet® communications network using and add-on communication module.
• ECM fan motor – improves unit efficiency and maintains constant airflow over varying system static pressure.
• Hot Gas Reheat Coil – Required for many applications needing added humidity control, this option is selectable for sizes 019 to 070.
• Desuperheater – this heat exchanger system aids in domestic hot water production while the water source heat pump is in the cooling mode of operation. 
• Auxiliary/Emergency Electric Heat Coil (5kw or 10kw – single point power) – in emergency situations where the compressor no longer functions, the integral electric heat coil can provide temporary heating until the compressor is replaced.
• 2-way motorized valves (NO or NC) – ideal for variable pumping applications – when there isn’t a call for unit operation, the valve closes, reducing the flow requirements through the condenser water loop.
• Compressor Sound Blanket – new and improved compressor sound blanket for sound sensitive applications.
• Painted Cabinet  - suitable for residential applications.

Performance Summary

Unit Size	Capacity (BTUH)	EER – Water Loop		EER – Ground Loop		EER – Ground Source		Nominal Airflow (CFM)
		PSC	ECM	PSC	ECM	PSC	ECM
VFW007	*	*	N/A	*	N/A	*	N/A	*
VFW009	9,060	14.0	N/A	16.7	N/A	23.8	N/A	300
VFW012	12,000	14.4	N/A	16.9	N/A	23.8	N/A	400
VFW015	14,700	16.0	*	19.6	*	28.1	*	500
VFW019	19,200	15.2	16.6	17.3	19.0	23.5	26.1	600
VFW024	23,800	15.1	16.3	17.7	19.2	23.3	25.8	800
VFW030	30,000	17.0	17.0	19.1	19.3	25.1	25.5	1000
VFW036	39,500	14.8	15.0	17.3	16.6	22.3	21.3	1300
VFW042	43,900	15.0	16.2	17.0	18.9	22.1	24.8	1400
VFW048	48,100	14.7	16.0	15.8	18.2	20.3	23.8	1600
VFW060	63,200	15.1	15.7	16.3	18.0	20.5	22.9	2000
VFW070	75,400	13.5	14.0	13.7	16.2	16.6	19.6	2160

 

N/A = Not available

* = To be announced at a later date.