Everpure SS-10 Scalestick Filter Cartridge EV9799-02
Everpure SS-10 EV9799-02 Scalestick Filter Cartridge inhibits mineral scale deposits and provides corrosion protection in water-fed equipment. The Everpure SS-10 features Hydroblend compound, a unique blend that inhibits mineral scale deposits and provides corrosion protection in low flow waterfed equipment. Its Scalestick patented design dispenses a controlled amount of Hydroblend for longterm protection and provides greater effectiveness than standard phosphate treatments.
The Everpure SS-10 translucent filter cartridge allows simple visual monitoring of product usage and ensures against wasteful premature cartridge replacement. Integral feed cartridge fits most standard 10 inch housings. The Everpure SS-10 is unaffected by high temperatures, permitting a wide variety of applications. The filter prevents limescale build-up while providing corrosion protection for steamers, combi-ovens, coffee machines, ice machines, proofers and insta-hot water dispensers. Dimensions of the device are 10.06” H x 1.31” Diameter. Its Service Flow Rate is 0.1-6 gpm and the Maximum Temperature is 150°F. Its capacity is approximately 6 months. The capacity will vary depending on application and water usage. On flow rates less than 1 gpm, capacities may be reduced.
The Everpure SS-10 scalestick should be inspected every 6 months. Replace the SS-10 ScaleStick cartridge before Hydroblend compound is completely dissolved. Deliming of equipment prior to application is recommended, but not required. Pre-existing equipment scale may come loose and clog equipment. Remove any loose scale to assure satisfactory operation. Install vertically with black O-band seal up. The Everpure SS-10 ScaleStick cartridge cannot be installed into filter wraps. Flushing is not required for ScaleStick cartridges. If inlet feed water temperature is above 125°F, hot water housing must be used. The Everpure SS-10 Scalestick filter fits standard 10" Housings.
It fits Model A-10 Clear Housing (EV9100-01). This housing is used for temperatures less than 125°F. It also fits all current SR-X housings and all existing old style AR-X housings. If inlet feed water temperature is above 125°F, hot water housing must be used.
Everpure SS-10 EV9799-02 Scalestick Instructions:
Everpure SS-10 EV9799-02 Scalestick Housings:
Everpure SS-10 Scalestick Cartridge Specs:
Everpure SS-10 Scalestick Cartridge Features: